Massaflowmeting - SWR PicoFlow

Mass Flow Measurement – PicoFlow

The PicoFlow from Envea (formerly SWR) is a mass flow meter designed for measuring flow in transport pipes with very low material concentration. The sensor is well-suited for pneumatic applications but can also be used in situations where the material is falling at a speed of at least 2 meters per second.

Sensor features

  • Measurement range: 100 grams per hour to 100 kilograms per hour
  • Process temperature: Standard 150°C (optional up to 500°C)
  • Pressure: Maximum 2 bar (optional up to 25 bar)
  • Ambient temperature: -20°C to 60°C
  • IP66; ATEX: Cat. 1/2 GD
  • Output: 4-20 mA

Installation

The PicoFlow can be installed in metal pipes and ducts. The sensor should be placed as far as possible from bends and other fittings, such as valves and slides. The distance between the sensor and the fittings should be at least three times the diameter of the pipe or duct, in both directions, as shown in the adjacent illustration.

For non-metal transport pipes, the section must be encased in a metal sleeve or grid. Once the installation location is determined, a hole should be drilled in the pipe so the welding profile can be welded to the pipe at a right angle. The sensor rod can then be screwed into the holder via the threaded connection.

Do you have a question? Get in touch with one of our experts.


Salvatore Agresta
  • Senior Application Consultant

In brief:

Suitable applications:

External link(s):

Downloads

Would you like to have the files of your choice automatically sent to your email? Click on it folder icon to add the download to your folder, and send them by clicking the bottom right.

datasheet Envea (SWR) PicoFlow – Product sheet
manual Envea (SWR) PicoFlow – Operating Instruction
brochure Envea (SWR) MSE300 –DIN-rail 2 evaluation unit
brochure Envea (SWR) – Process brochure
brochure Envea (SWR) – Flow brochure

Also interesting:

Verschildruk transmitter - Fischer DE13

Differential pressure transmitter – DE13

Fischer’s DE13 differential pressure transmitter is highly suitable for demanding applications where high accuracy is required. Due to its design, the DE13 can operate with a maximum static pressure of…

Verschildruktransmitter - Fischer DE16

Differential pressure transmitter – DE16

The DE16 differential pressure transmitter from Fischer, with its simple design, is highly versatile. It is suitable for measuring overpressure, differential pressure, and vacuum, with a measurement range from 0..60…

Verschildruktransmitter - Fischer DE23

Differential pressure transmitter – DE23

The DE23 from Fischer is a 2-wire transmitter particularly suitable for measuring very small pressure differences in gases or air, both atmospheric (positive/negative) and differential. Fischer has equipped the instrument…

Verschildruktransmitter - Fischer DE25

Differential pressure transmitter – DE25

The differential pressure transmitter type DE25 from Fischer has a 3-wire electrical interface. The DE25 is highly suitable for precise measurements of positive or negative atmospheric pressure and differential pressure…

Verschildruk transmitter - Fischer DE28

Differential pressure transmitter – DE28

The differential pressure transmitter from Fischer, type DE28, is designed for measuring overpressure, vacuum, and differential pressure in both liquids and gases. The DE28 has a measurement range between 0..400…

Verschildruktransmitter DE44 met LCD van Fischer

Differential pressure transmitter – DE44

The digital DE44 dual-channel pressure transmitter from Fischer features two built-in pressure sensors. Its dual channels allow for double limit detection. The transmitter is suitable for measuring gas or liquid,…