{"id":38277,"date":"2026-10-23T09:53:32","date_gmt":"2026-10-23T07:53:32","guid":{"rendered":"https://www.istec.com/pt-br/?p=38277"},"modified":"2026-11-19T11:55:58","modified_gmt":"2026-11-19T10:55:58","slug":"vibration-monitoring-on-wind-power-generation-assets-with-vibsys","status":"publish","type":"post","link":"https://www.istec.com/pt-br/vibration-monitoring-on-wind-power-generation-assets-with-vibsys/","title":{"rendered":"Vibration monitoring on wind power generation assets with VibSys®"},"content":{"rendered":"<p><span class=\"large-p\">Wind power generation depends on the mechanical reliability of rotating equipment inside each turbine and across the broader wind farm. Wind energy drives the rotor, which transfers mechanical power through the drivetrain to the generator for conversion into electrical power. In geared turbines, a gearbox forms an important part of this drivetrain, while direct-drive turbines operate without a conventional gearbox, where the rotor directly powers the generator. </span></p>\n<p>The drivetrain contains several mechanically connected components operating under continuously changing aerodynamic loads. Bearings, shafts, gearboxes where applicable, couplings, and generators must operate reliably to maintain turbine availability and stable energy production.</p>\n<p>For wind farm operators, this reliability challenge extends across an entire fleet. Turbines are distributed over large geographical areas and can be difficult or time-consuming to access, making continuous insight into drivetrain condition particularly valuable.</p>\n<h2>The challenge: variable loads across distributed assets</h2>\n<p>Wind turbines operate under continuously changing aerodynamic and environmental conditions. Wind speed, turbulence, rotor speed, torque, temperature, and operating state all influence drivetrain loads and vibration behavior.</p>\n<p>These variations make machine-condition assessment more complex. A change in vibration does not automatically indicate mechanical degradation because measured behavior changes naturally with speed, torque, and operating conditions. Reliable interpretation therefore requires consistent trending and sufficient operating context.</p>\n<p>Accessibility creates another challenge. A wind farm can contain many turbines spread across a large area, while offshore or remote locations can make routine inspections particularly resource-intensive. Periodic measurements provide useful snapshots, but mechanical changes can develop between visits.</p>\n<p>The challenge is therefore both technical and practical: maintaining sufficient condition visibility across a distributed fleet without creating a proportional increase in inspection work, travel, and specialist capacity.</p>\n<h2>Why vibration monitoring matters in wind power generation</h2>\n<p>Many relevant mechanical problems within a wind turbine drivetrain develop progressively. Changes in bearing condition, alignment, mechanical looseness, balance, or gear condition can influence vibration behavior before functional failure occurs.</p>\n<p>The drivetrain is particularly important because mechanical power must be transferred reliably from the rotor to the generator. In geared turbines, the gearbox introduces multiple gears, shafts, and bearings whose changing condition can create characteristic vibration patterns. Gearbox wear, bearing degradation, and alignment-related problems can therefore become visible in vibration data as they develop.</p>\n<p>The generator forms another important part of the drivetrain. Mechanical changes in generator bearings, alignment, or connected drivetrain components can influence vibration behavior and provide valuable information about developing machine condition.</p>\n<p>Because these components are mechanically connected, vibration measured at one location should not automatically be interpreted as a local fault. Changes in operating conditions and vibration transferred through the drivetrain must be considered when diagnosing the source of abnormal behavior.</p>\n<p>Continuous vibration monitoring provides the historical context needed to evaluate these changes. By trending vibration together with relevant operating information such as rotational speed, maintenance teams can identify persistent changes and determine which turbines or drivetrain components require closer diagnostic attention.</p>\n<h2>Applying VibSys® in wind power generation</h2>\n<p><a href=\"https://www.istec.com/pt-br/product/istec-vibsys/\">VibSys®</a> is designed for continuous vibration condition monitoring across rotating equipment and is particularly relevant for distributed assets that are remote or difficult to access.</p>\n<p>Within a wind turbine drivetrain, VibSys® can acquire vibration measurements from multiple positions across bearings, generators, and gearboxes where applicable. Supporting speed measurements provide additional operating context for interpreting vibration behavior under changing turbine speeds.</p>\n<p>VibSys® continuously acquires high-quality vibration and supporting machine data close to the monitored equipment and processes this information locally. Detailed vibration data remains available when changing trends require further diagnostic analysis.</p>\n<p>For wind applications, this enables continuous machine-condition visibility without relying solely on periodic site visits or manual vibration measurements. Maintenance and reliability teams can use changing condition trends to determine which turbines require further analysis rather than inspecting every turbine at the same frequency.</p>\n<p>The scalable architecture also supports deployment across larger turbine populations. Monitoring can begin with selected turbines and expand across additional units or wind farm locations as requirements grow. Open connectivity allows condition information and vibration data to be incorporated into existing operational and analysis environments.</p>\n<p>VibSys® is intended for condition monitoring and diagnostics to support maintenance decision-making. It does not replace turbine protection, safety-related shutdown systems, or other dedicated protection functions.</p>\n<p><a href=\"https://www.istec.com/pt-br/product/istec-vibsys/\"><img loading=\"lazy\" decoding=\"async\" class=\"alignright wp-image-38346 size-medium\" src=\"https://img.istec.com/2025/09/39d1ba53-istec-vibsys-m40-conform-afmetingen-300x300.jpg\" alt=\"\" width=\"300\" height=\"300\" srcset=\"https://img.istec.com/2025/09/39d1ba53-istec-vibsys-m40-conform-afmetingen-300x300.jpg 300w, https://img.istec.com/2025/09/39d1ba53-istec-vibsys-m40-conform-afmetingen-730x730.jpg 730w, https://img.istec.com/2025/09/39d1ba53-istec-vibsys-m40-conform-afmetingen-150x150.jpg 150w, https://img.istec.com/2025/09/39d1ba53-istec-vibsys-m40-conform-afmetingen-768x768.jpg 768w, https://img.istec.com/2025/09/39d1ba53-istec-vibsys-m40-conform-afmetingen-1536x1536.jpg 1536w, https://img.istec.com/2025/09/39d1ba53-istec-vibsys-m40-conform-afmetingen.jpg 1920w\" sizes=\"auto, (max-width: 300px) 100vw, 300px\" /></a></p>\n<p><strong> Key advantages for wind power generation</strong></p>\n<ul>\n<li>Continuous vibration condition monitoring across wind turbine drivetrains</li>\n<li>Multiple vibration measurement points across mechanically connected equipment</li>\n<li>Speed information to support vibration analysis under changing operating conditions</li>\n<li>Earlier visibility into developing mechanical changes</li>\n<li>High-quality vibration data for trending and diagnostic analysis</li>\n<li>Local processing close to the monitored equipment</li>\n<li>Reduced dependency on manual measurements and routine site visits</li>\n<li>Scalable deployment across additional turbines and wind farm locations</li>\n<li>Open connectivity with existing operational and analysis environments</li>\n<li>More efficient use of vibration and reliability expertise</li>\n</ul>\n<p><strong>Impact on maintenance and wind turbine reliability</strong></p>\n<p>Continuous vibration condition monitoring gives maintenance teams greater visibility into mechanical changes across wind turbine drivetrains.</p>\n<p>Persistent changes in bearings, generators, gearboxes, or connected drivetrain components can be identified earlier, giving maintenance teams more time to investigate the source and determine the appropriate maintenance action.</p>\n<p>This is particularly valuable for large, remote, or offshore wind farms, where accessing a turbine requires considerably more planning and effort than monitoring machinery at a centralized industrial site. Condition information can help prioritize which turbines require inspection and where specialist attention provides the most value.</p>\n<p>For wind farm operators, this supports more focused maintenance planning and better use of available reliability expertise while maintaining condition visibility across a distributed turbine fleet.</p>\n<p><img loading=\"lazy\" decoding=\"async\" class=\"aligncenter wp-image-34908 size-full\" src=\"https://img.istec.com/2025/11/3f36cb1c-vibsys-applications-20250718-v1.1_wind-turbine.jpg?q=65\" alt=\"\" width=\"1570\" height=\"500\" srcset=\"https://img.istec.com/2025/11/3f36cb1c-vibsys-applications-20250718-v1.1_wind-turbine.jpg 1570w, https://img.istec.com/2025/11/3f36cb1c-vibsys-applications-20250718-v1.1_wind-turbine-300x96.jpg 300w, https://img.istec.com/2025/11/3f36cb1c-vibsys-applications-20250718-v1.1_wind-turbine-730x232.jpg 730w, https://img.istec.com/2025/11/3f36cb1c-vibsys-applications-20250718-v1.1_wind-turbine-768x245.jpg 768w, https://img.istec.com/2025/11/3f36cb1c-vibsys-applications-20250718-v1.1_wind-turbine-1536x489.jpg 1536w\" sizes=\"auto, (max-width: 1570px) 100vw, 1570px\" /></p>\n<p><a href=\"https://img.istec.com/2025/11/3f36cb1c-vibsys-applications-20250718-v1.1_wind-turbine.jpg?q=65\">[Click here to enlarge image]</a></p>\n<p><strong>From periodic measurements to scalable condition monitoring</strong><br />\nManaging a distributed wind turbine fleet through manual vibration measurements alone requires travel, time, and specialist capacity. As the number of turbines increases, expanding measurement frequency manually becomes increasingly difficult.</p>\n<p>Continuous monitoring provides a more scalable approach. Vibration and speed data can be acquired consistently without requiring a specialist to visit every turbine for every measurement. Reliability teams can then focus on interpreting relevant trends, diagnosing developing mechanical problems, and planning appropriate maintenance actions.</p>\n<p>Monitoring does not need to cover the entire wind farm from the beginning. A scalable approach allows continuous monitoring to start with selected turbines and expand across the fleet as the monitoring strategy develops.</p>\n<p><strong>Increase monitoring coverage with VibSys®</strong><br />\nEffective condition monitoring in wind power generation is not simply about collecting more vibration data. It is about creating sufficient condition visibility across a distributed turbine fleet to know where specialist attention is required.</p>\n<p><a href=\"https://www.istec.com/pt-br/product/istec-vibsys/\">VibSys®</a> provides a scalable foundation for expanding that visibility. Continuous vibration acquisition, supporting speed measurements, local processing, high-quality diagnostic data, and open connectivity make it possible to monitor more rotating equipment without creating an equivalent increase in manual inspection work.</p>\n<p>Monitoring can start with selected turbines or drivetrain positions where continuous insight provides the most value and expand across additional turbines as requirements grow.</p>\n<p>This enables maintenance and reliability teams to extend continuous monitoring across generators, gearboxes where applicable, bearings, shafts, and other drivetrain components, identify relevant changes earlier, and focus specialist expertise on the turbines and machine positions that require attention.</p>\n","protected":false},"excerpt":{"rendered":"<p>Wind power generation depends on the mechanical reliability of rotating equipment inside each turbine and across the broader wind farm. Wind energy drives the rotor, which transfers mechanical power through the drivetrain to the generator for conversion into electrical power. In geared turbines, a gearbox forms an important part of this drivetrain, while direct-drive turbines &hellip; </p>\n","protected":false},"author":3,"featured_media":28888,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"footnotes":""},"categories":[98],"topics":[244,251,263,282],"class_list":["post-38277","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-uncategorized","topics-wind-turbines","topics-vibsys","topics-application-note","topics-power-generation"],"acf":[],"yoast_head":"<!-- This site is optimized with the Yoast SEO plugin v27.7 - https://yoast.com/product/yoast-seo-wordpress/ -->\n<title>Vibration monitoring on wind power generation assets with VibSys® &#8212; Istec</title>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" />\n<link rel=\"canonical\" href=\"https://www.istec.com/pt-br/vibration-monitoring-on-wind-power-generation-assets-with-vibsys/\" />\n<meta property=\"og:locale\" content=\"pt_BR\" />\n<meta property=\"og:type\" content=\"article\" />\n<meta property=\"og:title\" content=\"Vibration monitoring on wind power generation assets with VibSys® &#8212; Istec\" />\n<meta property=\"og:description\" content=\"Wind power generation depends on the mechanical reliability of rotating equipment inside each turbine and across the broader wind farm. Wind energy drives the rotor, which transfers mechanical power through the drivetrain to the generator for conversion into electrical power. In geared turbines, a gearbox forms an important part of this drivetrain, while direct-drive turbines &hellip;\" />\n<meta property=\"og:url\" content=\"https://www.istec.com/pt-br/vibration-monitoring-on-wind-power-generation-assets-with-vibsys/\" />\n<meta property=\"og:site_name\" content=\"Istec\" />\n<meta property=\"article:published_time\" content=\"2026-10-23T07:53:32+00:00\" />\n<meta property=\"article:modified_time\" content=\"2026-11-19T10:55:58+00:00\" />\n<meta property=\"og:image\" content=\"https://img.istec.com/2024/02/vibration-analysis-wind-turbines-forces.jpg?q=65\" />\n\t<meta property=\"og:image:width\" content=\"730\" />\n\t<meta property=\"og:image:height\" content=\"270\" />\n\t<meta property=\"og:image:type\" content=\"image/jpeg\" />\n<meta name=\"author\" content=\"istecadmin\" />\n<meta name=\"twitter:card\" content=\"summary_large_image\" />\n<meta name=\"twitter:label1\" content=\"Written by\" />\n\t<meta name=\"twitter:data1\" content=\"istecadmin\" />\n\t<meta name=\"twitter:label2\" content=\"Est. reading time\" />\n\t<meta name=\"twitter:data2\" content=\"6 minutes\" />\n<script type=\"application/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\\/\\/schema.org\",\"@graph\":[{\"@type\":\"Article\",\"@id\":\"https:\\/\\/www.istec.com\\/vibration-monitoring-on-wind-power-generation-assets-with-vibsys\\/#article\",\"isPartOf\":{\"@id\":\"https:\\/\\/www.istec.com\\/vibration-monitoring-on-wind-power-generation-assets-with-vibsys\\/\"},\"author\":{\"name\":\"istecadmin\",\"@id\":\"https:\\/\\/www.istec.com\\/#\\/schema\\/person\\/04b7a48a774cc6803bde480e419841db\"},\"headline\":\"Vibration monitoring on wind power generation assets with VibSys®\",\"datePublished\":\"2026-10-23T07:53:32+00:00\",\"dateModified\":\"2026-11-19T10:55:58+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\\/\\/www.istec.com\\/vibration-monitoring-on-wind-power-generation-assets-with-vibsys\\/\"},\"wordCount\":1170,\"publisher\":{\"@id\":\"https:\\/\\/www.istec.com\\/#organization\"},\"image\":{\"@id\":\"https:\\/\\/www.istec.com\\/vibration-monitoring-on-wind-power-generation-assets-with-vibsys\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\/\\/img.istec.com\\/2024\\/02\\/vibration-analysis-wind-turbines-forces.jpg?q=65\",\"inLanguage\":\"pt-BR\"},{\"@type\":\"WebPage\",\"@id\":\"https:\\/\\/www.istec.com\\/vibration-monitoring-on-wind-power-generation-assets-with-vibsys\\/\",\"url\":\"https:\\/\\/www.istec.com\\/vibration-monitoring-on-wind-power-generation-assets-with-vibsys\\/\",\"name\":\"Vibration monitoring on wind power generation assets with VibSys® &#8212; Istec\",\"isPartOf\":{\"@id\":\"https:\\/\\/www.istec.com\\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\\/\\/www.istec.com\\/vibration-monitoring-on-wind-power-generation-assets-with-vibsys\\/#primaryimage\"},\"image\":{\"@id\":\"https:\\/\\/www.istec.com\\/vibration-monitoring-on-wind-power-generation-assets-with-vibsys\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\/\\/img.istec.com\\/2024\\/02\\/vibration-analysis-wind-turbines-forces.jpg?q=65\",\"datePublished\":\"2026-10-23T07:53:32+00:00\",\"dateModified\":\"2026-11-19T10:55:58+00:00\",\"breadcrumb\":{\"@id\":\"https:\\/\\/www.istec.com\\/vibration-monitoring-on-wind-power-generation-assets-with-vibsys\\/#breadcrumb\"},\"inLanguage\":\"pt-BR\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\\/\\/www.istec.com\\/vibration-monitoring-on-wind-power-generation-assets-with-vibsys\\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"pt-BR\",\"@id\":\"https:\\/\\/www.istec.com\\/vibration-monitoring-on-wind-power-generation-assets-with-vibsys\\/#primaryimage\",\"url\":\"https:\\/\\/img.istec.com\\/2024\\/02\\/vibration-analysis-wind-turbines-forces.jpg?q=65\",\"contentUrl\":\"https:\\/\\/img.istec.com\\/2024\\/02\\/vibration-analysis-wind-turbines-forces.jpg?q=65\",\"width\":730,\"height\":270},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\/\\/www.istec.com\\/vibration-monitoring-on-wind-power-generation-assets-with-vibsys\\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\\/\\/www.istec.com\\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"Vibration monitoring on wind power generation assets with VibSys®\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\\/\\/www.istec.com\\/#website\",\"url\":\"https:\\/\\/www.istec.com\\/\",\"name\":\"Istec\",\"description\":\"\",\"publisher\":{\"@id\":\"https:\\/\\/www.istec.com\\/#organization\"},\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\\/\\/www.istec.com\\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"pt-BR\"},{\"@type\":\"Organization\",\"@id\":\"https:\\/\\/www.istec.com\\/#organization\",\"name\":\"Istec\",\"url\":\"https:\\/\\/www.istec.com\\/\",\"logo\":{\"@type\":\"ImageObject\",\"inLanguage\":\"pt-BR\",\"@id\":\"https:\\/\\/www.istec.com\\/#\\/schema\\/logo\\/image\\/\",\"url\":\"https:\\/\\/img.istec.com\\/2018\\/01\\/istec-international-logo.jpg?q=65\",\"contentUrl\":\"https:\\/\\/img.istec.com\\/2018\\/01\\/istec-international-logo.jpg?q=65\",\"width\":83,\"height\":88,\"caption\":\"Istec\"},\"image\":{\"@id\":\"https:\\/\\/www.istec.com\\/#\\/schema\\/logo\\/image\\/\"}},{\"@type\":\"Person\",\"@id\":\"https:\\/\\/www.istec.com\\/#\\/schema\\/person\\/04b7a48a774cc6803bde480e419841db\",\"name\":\"istecadmin\",\"image\":{\"@type\":\"ImageObject\",\"inLanguage\":\"pt-BR\",\"@id\":\"https:\\/\\/secure.gravatar.com\\/avatar\\/ef2104d69abb108ecc953f2504e75cff42eef5e48ce6e93be2b0814a1056f0aa?s=96&d=mm&r=g\",\"url\":\"https:\\/\\/secure.gravatar.com\\/avatar\\/ef2104d69abb108ecc953f2504e75cff42eef5e48ce6e93be2b0814a1056f0aa?s=96&d=mm&r=g\",\"contentUrl\":\"https:\\/\\/secure.gravatar.com\\/avatar\\/ef2104d69abb108ecc953f2504e75cff42eef5e48ce6e93be2b0814a1056f0aa?s=96&d=mm&r=g\",\"caption\":\"istecadmin\"},\"url\":\"https:\\/\\/www.istec.com\\/specialist\\/istecadmin\\/\"}]}</script>\n<!-- / Yoast SEO plugin. -->","yoast_head_json":{"title":"Monitoramento de vibração em instalações de geração de energia eólica com o VibSys® — Istec","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https://www.istec.com/pt-br/vibration-monitoring-on-wind-power-generation-assets-with-vibsys/","og_locale":"pt_BR","og_type":"article","og_title":"Vibration monitoring on wind power generation assets with VibSys® &#8212; Istec","og_description":"Wind power generation depends on the mechanical reliability of rotating equipment inside each turbine and across the broader wind farm. Wind energy drives the rotor, which transfers mechanical power through the drivetrain to the generator for conversion into electrical power. In geared turbines, a gearbox forms an important part of this drivetrain, while direct-drive turbines &hellip;","og_url":"https://www.istec.com/pt-br/vibration-monitoring-on-wind-power-generation-assets-with-vibsys/","og_site_name":"Istec","article_published_time":"2026-10-23T07:53:32+00:00","article_modified_time":"2026-11-19T10:55:58+00:00","og_image":[{"width":730,"height":270,"url":"https://img.istec.com/2024/02/vibration-analysis-wind-turbines-forces.jpg?q=65","type":"image/jpeg"}],"author":"istecadmin","twitter_card":"summary_large_image","twitter_misc":{"Written by":"istecadmin","Est. reading time":"6 minutes"},"schema":{"@context":"https://schema.org","@graph":[{"@type":"Article","@id":"https://www.istec.com/pt-br/vibration-monitoring-on-wind-power-generation-assets-with-vibsys/#article","isPartOf":{"@id":"https://www.istec.com/pt-br/vibration-monitoring-on-wind-power-generation-assets-with-vibsys/"},"author":{"name":"istecadmin","@id":"https://www.istec.com/pt-br/#/schema/person/04b7a48a774cc6803bde480e419841db"},"headline":"Vibration monitoring on wind power generation assets with VibSys®","datePublished":"2026-10-23T07:53:32+00:00","dateModified":"2026-11-19T10:55:58+00:00","mainEntityOfPage":{"@id":"https://www.istec.com/pt-br/vibration-monitoring-on-wind-power-generation-assets-with-vibsys/"},"wordCount":1170,"publisher":{"@id":"https://www.istec.com/pt-br/#organization"},"image":{"@id":"https://www.istec.com/pt-br/vibration-monitoring-on-wind-power-generation-assets-with-vibsys/#primaryimage"},"thumbnailUrl":"https://img.istec.com/2024/02/vibration-analysis-wind-turbines-forces.jpg?q=65","inLanguage":"pt-BR"},{"@type":"WebPage","@id":"https://www.istec.com/pt-br/vibration-monitoring-on-wind-power-generation-assets-with-vibsys/","url":"https://www.istec.com/pt-br/vibration-monitoring-on-wind-power-generation-assets-with-vibsys/","name":"Vibration monitoring on wind power generation assets with VibSys® &#8212; Istec","isPartOf":{"@id":"https://www.istec.com/pt-br/#website"},"primaryImageOfPage":{"@id":"https://www.istec.com/pt-br/vibration-monitoring-on-wind-power-generation-assets-with-vibsys/#primaryimage"},"image":{"@id":"https://www.istec.com/pt-br/vibration-monitoring-on-wind-power-generation-assets-with-vibsys/#primaryimage"},"thumbnailUrl":"https://img.istec.com/2024/02/vibration-analysis-wind-turbines-forces.jpg?q=65","datePublished":"2026-10-23T07:53:32+00:00","dateModified":"2026-11-19T10:55:58+00:00","breadcrumb":{"@id":"https://www.istec.com/pt-br/vibration-monitoring-on-wind-power-generation-assets-with-vibsys/#breadcrumb"},"inLanguage":"pt-BR","potentialAction":[{"@type":"ReadAction","target":["https://www.istec.com/pt-br/vibration-monitoring-on-wind-power-generation-assets-with-vibsys/"]}]},{"@type":"ImageObject","inLanguage":"pt-BR","@id":"https://www.istec.com/pt-br/vibration-monitoring-on-wind-power-generation-assets-with-vibsys/#primaryimage","url":"https://img.istec.com/2024/02/vibration-analysis-wind-turbines-forces.jpg?q=65","contentUrl":"https://img.istec.com/2024/02/vibration-analysis-wind-turbines-forces.jpg?q=65","width":730,"height":270},{"@type":"BreadcrumbList","@id":"https://www.istec.com/pt-br/vibration-monitoring-on-wind-power-generation-assets-with-vibsys/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https://www.istec.com/pt-br/"},{"@type":"ListItem","position":2,"name":"Vibration monitoring on wind power generation assets with VibSys®"}]},{"@type":"WebSite","@id":"https://www.istec.com/pt-br/#website","url":"https://www.istec.com/pt-br/","name":"Istec","description":"","publisher":{"@id":"https://www.istec.com/pt-br/#organization"},"potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https://www.istec.com/pt-br/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"pt-BR"},{"@type":"Organization","@id":"https://www.istec.com/pt-br/#organization","name":"Istec","url":"https://www.istec.com/pt-br/","logo":{"@type":"ImageObject","inLanguage":"pt-BR","@id":"https://www.istec.com/pt-br/#/schema/logo/image/","url":"https://img.istec.com/2018/01/istec-international-logo.jpg?q=65","contentUrl":"https://img.istec.com/2018/01/istec-international-logo.jpg?q=65","width":83,"height":88,"caption":"Istec"},"image":{"@id":"https://www.istec.com/pt-br/#/schema/logo/image/"}},{"@type":"Person","@id":"https://www.istec.com/pt-br/#/schema/person/04b7a48a774cc6803bde480e419841db","name":"istecadmin","image":{"@type":"ImageObject","inLanguage":"pt-BR","@id":"https://secure.gravatar.com/avatar/ef2104d69abb108ecc953f2504e75cff42eef5e48ce6e93be2b0814a1056f0aa?s=96&d=mm&r=g","url":"https://secure.gravatar.com/avatar/ef2104d69abb108ecc953f2504e75cff42eef5e48ce6e93be2b0814a1056f0aa?s=96&d=mm&r=g","contentUrl":"https://secure.gravatar.com/avatar/ef2104d69abb108ecc953f2504e75cff42eef5e48ce6e93be2b0814a1056f0aa?s=96&d=mm&r=g","caption":"istecadmin"},"url":"https://www.istec.com/pt-br/specialist/istecadmin/"}]}},"_links":{"self":[{"href":"https://www.istec.com/pt-br/wp-json/wp/v2/posts/38277","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https://www.istec.com/pt-br/wp-json/wp/v2/posts"}],"about":[{"href":"https://www.istec.com/pt-br/wp-json/wp/v2/types/post"}],"author":[{"embeddable":true,"href":"https://www.istec.com/pt-br/wp-json/wp/v2/users/3"}],"replies":[{"embeddable":true,"href":"https://www.istec.com/pt-br/wp-json/wp/v2/comments?post=38277"}],"version-history":[{"count":26,"href":"https://www.istec.com/pt-br/wp-json/wp/v2/posts/38277/revisions"}],"predecessor-version":[{"id":38661,"href":"https://www.istec.com/pt-br/wp-json/wp/v2/posts/38277/revisions/38661"}],"wp:featuredmedia":[{"embeddable":true,"href":"https://www.istec.com/pt-br/wp-json/wp/v2/media/28888"}],"wp:attachment":[{"href":"https://www.istec.com/pt-br/wp-json/wp/v2/media?parent=38277"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https://www.istec.com/pt-br/wp-json/wp/v2/categories?post=38277"},{"taxonomy":"topics","embeddable":true,"href":"https://www.istec.com/pt-br/wp-json/wp/v2/topics?post=38277"}],"curies":[{"name":"wp","href":"https://api.w.org/{rel}","templated":true}]}}